Learn More

 

 

What're your opinions on What Would Cause My Electric Water Heater to Stop Working??

Several modern-day residences use an electric water heater for their heater, due to its benefit and ease of use. However, just like any other electrical appliances, troubles might develop with its use, suddenly. It can be truly aggravating to wake up to a cold shower rather than a hot one or having your bath with water that isn't hot sufficient and even too hot. Whatever the case may be, water heater problems can be quite nerve-racking. The good news is, we have actually made a checklist of feasible remedies to your hot water heater concerns. There are a variety of factors that might trigger most of these problems, it could be a problem with the power supply, the electric burner, or the thermostat. Prior to doing anything, ensure you switch off the major power supply for security. Whatever the problem is, getting it fixed need to not present excessive of an issue if you adhere to these steps:

 

Check Your Power Supply:

As standard as this might seem, it is extremely essential. Without ample power, your hot water heater will certainly not operate. So the first thing to do when your water all of a sudden stops working is to confirm that it isn't a power problem. Check if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the issue, simply transform it on and off once again. Change any type of broken or worn-out fuse. Test the device with power after these adjustments to see if it's now working.

 

Check the Burner in the Hot Water Heater:

If it's not a power issue, then try checking out your burner if it is still functioning. Check each of your heating elements to be sure the trouble isn't with any one of them. If any one of them is faulty, replace that part and then check whether the hot water is back on.

 

Examine Your Thermostat:

If your hot water heater still isn't functioning or the water appearing isn't hot enough, you may require to examine the temperature level settings on your top thermostat. Make sure the circuit breaker is switched off prior to doing anything. Open the access panel and also press the red switch for temperature reset over the thermostat. This must help warm the water. Turn the breaker back on and also inspect if the issue has been settled.

 

Call A Specialist:

If after changing all defective components as well as resetting your temperature, the water heater still isn't functioning, you may require to call a professional plumber for a professional point of view. The issue with your heating unit could be that the hot and cold faucets have actually been changed or it may be undersized for the quantity of warm water required in your house. Whatever the case might be, a professional plumber would certainly help fix the problem.

 

Verdict

Water heater troubles are not always significant. Much of them are because of minor issues like a blown fuse or damaged heating element. Replacing the malfunctioning parts need to work. However, if you are still not able to resolve the trouble, give a call to your nearby plumber ahead to get it fixed.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

As a passionate reader about No Hot Water — Water Heater Repair, I imagined sharing that segment was a good idea. Enjoyed reading our write up? Please share it. Let somebody else find it. Thanks a bunch for your time. Visit us again soon.

Book Today